Healthyhandyman is reader-supported. When you buy via links on our site, we may earn an affiliate commission at no cost to you. Learn more.

5 Band Saw Uses – What Can It Be Used For?

a band saw

If you’re a serious woodworker, you probably have a band saw. It’s one of the most versatile power saws, capable of cutting through a variety of materials and with applications ranging from metalwork to cutting lumber into thinner boards.

We’ll tell you how a band saw works and then go through some of the things it can do for you.

How does a band saw work?

These tools are called band saws because the cutting action is performed by a blade that is formed into a continuous loop. The blade is looped around two pulleys that are turned by an electric motor. The blade is clamped firmly in place, and when the saw is turned around, it moves around the pulleys to create a continuous cutting action.

DeWalt band saw blade

Because the blade is relatively thin, you can use a band saw to make curved cuts or use a fence to make straight ones. Some models allow you to adjust the height so that you can cut thicker pieces of material. There are also portable band saws if you need to make curved cuts at a job site rather than in your workshop.

If you buy a stationary band saw, the blade will remain in place on the table, and you’ll need to move the workpiece through the blade. If you have a portable one, it’s the workpiece that stays in place while you move the blade.

a horizontal band saw

Depending on the kind of blade you buy, there are a lot of different things you can do with a band saw. Make sure the blade you buy is the right size and has the right pattern of teeth for the job.

5 Uses for a Band Saw

1. Curved cuts

One of the biggest things people use a band saw for is to make curved cuts in wood. Because the blade is stationary and runs on a loop, you can cut bigger, denser pieces of wood than with a smaller, portable saw.

Kerfing wood
Image credit: Autopilot, Wikipedia

You’ll probably want to trace out the pattern you’re cutting on the saw ahead of time, because you’ll need to move the wood yourself. This will cut down on operator error. You’ll also want to use a thinner blade. We’d recommend one that is a quarter-inch.

2. Resawing

One of the most difficult tasks in woodworking is cutting a piece of wood into two thinner pieces of wood, known as resawing. It requires time, patience, and a saw that doesn’t have a limited cut capacity. Because a band saw remains static on the table and runs the blade in a loop perpendicular to the teeth, you can use it for resawing.

Bandsaw Mill Plans You Can DIY Today

You’ll want a thicker blade for resawing, because it’s going to put your blade through some paces. The good thing is that you’re making a straight cut, so you don’t need a thin blade. You’ll also want a fence to keep your cuts straight.

3. Milling lumber

The same action that allows you to resaw allows you to mill lumber. This is basically resawing a raw log along all four planes. The first cut is going to be the most difficult because there are no flat surfaces. After that, it’s a matter of cutting off the rounds. Once you’re done, you can even resaw your rough lumber to your desired thickness.

HUGE Bandsaw Mill From Wilkerdos
Featured Image Credit: Wilkerdos

Make sure you use a thick blade, and don’t try to mill lumber bigger than the vertical space available on your table. Also, go nice and slow to prevent damaging your blade.

4. Resetting boards

Although it’s not usually recommended to cut multiple pieces of wood at one time, if you need to make sure that multiple pieces of wood have precisely the same angle, a band saw can do that. Tape the pieces of wood you need to cut together so that they hold fast. Measure out the angle you need to cut and outline it on the top one. Position a fence and use blocks to move the stack through, following the outline.

Shop Fox W1716 Aluma-Classic Fence with Standard Rails, 57-Inch

We’d suggest using a thick blade for maximum safety, but this is a situation where it’s possible that you need precision because you need to cut curves of some kind. Get the thickest blade you can that will still allow you to cut your curves accurately. If you can get to, as they say, “close enough for government work,” and sand it the rest of the way, that’s probably a good idea.

5. Non-wood materials

You don’t need to limit your materials to just wood. With the right blade, you can also cut PVC pipe and even some metals. Some band saws specialize in cutting metal and are a little more powerful, but you can use a wood band saw to cut certain soft metals.

Picking the right blade for that is like choosing between a hand saw to cut wood and a hand saw to cut metals. The one for metals will have smaller, sharper teeth that are closer together.

Conclusion

A band saw is a versatile addition to anyone’s workshop. Because of its unique construction, you can use it to cut curves or straight lines. It’s one of the few saws that you can use to resaw lumber or turn trees into usable wood. It can also cut a variety of materials if you get the right blade.

Before buying one, we’d suggest that you check out the different ones available, figuring out what you need it for and getting enough power to do the job. One key, however, is making sure that you get the right blade for the job. The blade you want for making curve cuts is not the blade you’ll want for turning a tree into floor molding.

Related posts

Other categories

Project ideas

Hand & power tools

woodworking

Garden

Automotive