Healthyhandyman is reader-supported. When you buy via links on our site, we may earn an affiliate commission at no cost to you. Learn more.

Best Portable Jobsite Table Saws – Reviews & Top Picks 2020

a portable jobsite table saw

When you think of a jobsite table saw, portability and convenience immediately come to mind. If it was as simple as choosing based on those two factors, picking out the best table saw to take with you would be a breeze!

But after years of on-the-job work with saws both great and not so great, we’ve come to appreciate saws that strike a fine balance between price, power, versatility, and durability. With those values in mind, we carefully examined and reviewed each jobsite table saw available on the market today.

In this guide, you’ll find only the portable table saws that met our rigorous quality standards. Read on to see what we’ve decided are the 6 best portable jobsite table saws in 2020, and consult the buyer’s guide for a fuller explanation of everything we took into account in our reviews.

A Look at the Winners (Compared in 2020):

Image Product Details
Best Overall
Winner
DeWalt DWE7491RS Portable Jobsite Table Saw DeWalt DWE7491RS Portable Jobsite Table Saw
  • Easy and reliable portability setup
  • Big rip capacity and great power
  • Equipped with a dust collection port
  • Best Value
    Second place
    SKIL 3410-02 Portable Table Saw SKIL 3410-02 Portable Table Saw
  • Lightweight and super portable
  • Powerful
  • Well-designed rip fence and blade guard
  • Third place
    Hitachi 10″ Portable Jobsite Tablesaw Hitachi 10″ Portable Jobsite Tablesaw
  • Integrated fold-out stand
  • Excellent stability
  • Soft start and electric brake
  • Makita 2705 10″ Contractor Table Saw with Stand Makita 2705 10″ Contractor Table Saw with Stand
  • Extremely durable
  • Powerful motor and stable base
  • Easy adjustments on blade guard and dual side guards
  • Bosch GTS1031 Jobsite Table Saw Bosch GTS1031 Jobsite Table Saw
  • Decent accuracy
  • Good portability
  • Strong motor
  • The 6 Best Portable Jobsite Table Saws:

    1. DeWalt DWE7491RS Portable Jobsite Table Saw – Best Overall

    DEWALT DWE7491RS

    Easy adjustments and ample power make the DeWalt DWE7491RS stand head and shoulders above the competition for portable jobsite table saws. Featuring a generous 32½-inch rip capacity powered by a 15-amp motor, it makes quick work of hardwoods, softwoods, and man-made materials alike.

    Weighing in at over 100 pounds, you shouldn’t expect to hoist this table saw over your shoulder – but a sturdy and easy to install rolling stand makes this an acceptable inconvenience. While there are lighter portable table saws available on the market, none of them has the stability and consequent safety provided by this saw from DeWalt.

    Combining a cut depth of 3⅛ inches at 90 degrees and 2¼ inches at 45 degrees with a rack and pinion fence system makes cutting wood to any size quick, easy, and accurate. Caveat: Pick up a new miter gauge instead of the included one; it’s not up to the same standards as the rest of the machine.

    In short, the DeWalt DWE7491RS can tackle any task that your jobsite might throw at it. No machine is perfect, but in our opinion this one comes darned close.

    Pros
    • Easy and reliable portability setup
    • Big rip capacity and great power, 4800 RPMs
    • Rack and pinion fence system
    • Equipped with a dust collection port
    Cons
    • Miter gauge isn’t so accurate

    2. SKIL 3410-02 Portable Table Saw – Best Value

    SKIL 3410-02

    The SKILSAW portable table saw knows its clientele, calling itself “ideal for DIY woodworkers” – and we’d have to agree. At such an affordable price, it lacks a lot of the bells and whistles of other jobsite table saws we reviewed, but that doesn’t stop it from packing a lot of power and accuracy in a small package.

    Weighing just 67 pounds, the SKILSAW portable table saw can feel a bit too light if you’re cutting pressure-treated lumber or hardwood. For small projects around the yard, though, it’s portable enough to carry without the help of a friend. Keep in mind that without wheels, you should set it up somewhere central to the work you’re doing.

    A self-aligning rip fence helps with both accuracy and safety, and a 15-amp motor produces nearly 5000 RPMs. Overall, we’re a huge fan of the SKILSAW 3410-02 portable table saw for anything short of heavy construction work, and we’re proud to call it the best portable jobsite table saw for the money.

    Pros
    • Lightweight and super portable
    • Powerful enough for any home woodworking job
    • Well-designed rip fence and blade guard
    Cons
    • No wheels
    • Struggles with the weight of hardwoods and pressure-treated lumber

    3. Hitachi 10″ Portable Jobsite Tablesaw

    Hitachi C10RJ 10"

    The Hitachi portable jobsite table saw won big points with us for its clever fold and roll stand. By incorporating the stand and saw into one integrated unit, it’s both the easiest saw to transport out of any we reviewed and has great stability when deployed.

    The tradeoff for this portability is a little less power and cutting capacity. A 15-amp motor produces 4500 RPMs for the saw blade, roughly 300 RPMs less than other table saws we reviewed. A telescoping table extension helps to accommodate for its smaller tabletop area but feels less stable when in use.

    If portability is your top priority in a jobsite table saw, the Hitachi is an excellent choice for the price. When you don’t mind taking more time with setup and transport, consider other options on our list.

    Pros
    • Integrated fold-out stand makes it extremely portable
    • Excellent stability once it’s set up
    • Soft start and electric brake are excellent safety features
    Cons
    • Not as powerful as comparable models
    • Smaller tabletop area

    4. Makita 2705 10″ Contractor Table Saw with Stand

     

    Makita 2705 10-inch table saw

    Of all the portable jobsite table saws we reviewed, the Makita stands out as being the most heavy-duty – and heaviest! With a combined weight of 145 pounds for the saw and stand, it’s easily the most durable and stable saw we’ve seen. Just plan on having someone to help you with transport and setup.

    Its 15-amp motor delivers 4800 RPMs. Combine this with the weight and stability of the Makita, and cutting through even the heaviest of hardwoods and pressure-treated wood feels quick and easy.

    Easy adjustment on the blade guard and dual side guards make it easy to safely measure and cut would of any dimension. In fact, it’s the only portable jobsite table saw we found that could easily rip 4’ x 8’ sheets of plywood without feeling unstable.

    For anyone looking to do some serious construction work, the Makita stands out as the best choice. This rugged durability comes at a premium, though; it’s more expensive than any other portable table saw in our review.

    Pros
    • Heavyweight construction makes it extremely durable
    • Powerful motor and stable base make large cuts easy
    • Easy adjustments on blade guard and dual side guards
    Cons
    • Very heavy for a portable saw
    • On the expensive side

    5. Bosch GTS1031 Jobsite Table Saw

    Bosch GTS1031 Jobsite Table Saw

    We wanted to love the Bosch GTS1031. You expect some loss of accuracy in a portable saw. That’s just the nature of the beast. But the Bosch held up pretty well. It still wasn’t as good as a stationary saw, but it was pretty close. And where the DeWalt’s miter gauge is, to put it mildly, problematic, the Bosch delivered up-and-down accuracy. It’s a worthy bearer of the Bosch name.

    With a 4-HP motor spitting out 5,000 RPM (no-load), the power is decent. However, the rip capacity is fairly weak compared to other saws on the list. You get 18 inches to the right but only 7¾ inches to the left, which ranks pretty low for a contractor saw. Unfortunately, the dust chute doesn’t work as advertised and the bevel range could be better. The GTS1031 makes the list for portability – its one-handle carry system is worth consideration if you move around often.

    Pros
    • Decent accuracy
    • Good portability
    • Strong motor
    Cons
    • Smaller rip capacity
    • Poor dust chute

    6. Jet JBTS-10MJS Small Jobsite Table Saw

    Jet JBTS-10MJS

    The best thing about the Jet JBTS-10MJS is that it’s easy to set up and take down. In fact, we’d even say that it excelled. That is as much an indictment of the saw as it is praising its positives.

    It fails the very basic tests of a portable job site saw in that it’s heavy and clumsy to move around. That by itself would be enough to drop this turkey to the bottom of our rankings. But our problems didn’t end there. It’s also poorly manufactured and not at all steady once set up. This makes for poor cut control and unsafe tool usage.

    Those problems might be forgiven a little bit if this wasn’t also easily the most expensive model we tested. That is, this was the worst quality saw we reviewed at the highest price. We can forgive a lot, but that’s something we can’t.

    Pros
    • Easy to set up
    Cons
    • Poor quality
    • Unstable
    • Expensive
    • Terrible value
    • Bulky

    Buyer’s Guide

    Buying the right jobsite table saw is a pretty big deal. For starters, they aren’t cheap. They can be several hundred dollars in price. From that standpoint alone, spending some time comparison shopping is worthwhile.

    The jobsite table saw is also, by its very nature, a tool intended to be portable. You’re going to take it with you to where the work is, so it’s something you’ll want to be able to depend on. You’ll find yourself fresh out of alternatives if it doesn’t deliver what you need when you need it to.

    We get why you’d read our reviews and perhaps want a little something more. We’re prepared to deliver it to you here with some tips we accumulated while researching.

    a jobsite table saw

    The right saw for your needs

    Jobsite table saws are a fairly specific line of tools that trade some performance for rugged construction and portability. If you wanted to go for straight-up cutting quality, you’d be looking at workshop table saws. If you’re looking up jobsite table saws, it means you’ve decided you need a table saw that you can take to where the work is.

    This is an important first step in getting the right saw to meet your needs. Right now, you might have browser tabs open researching different kinds of portable table saws. That brings us to your next choice: either a jobsite saw that comes with its own stand, or a benchtop saw that either sits on working space at the jobsite or for which you can pay extra for a separate stand.

    a job site table saw up close

    Portability

    The primary reason you’re looking at portable jobsite table saws is that you want to work at the site, not haul what you’re cutting back to your workshop. Naturally, your first priority in choosing a saw is finding one that pairs portability with your needs.

    An obvious starting point here is weight. If you can’t move the saw to the site, it’s not really all that portable. At 57 pounds, the Bosch GTS 1031 was the lightest of the portable saws we looked at. The SKIL 3410 weighs in at 67, but the other four saws we looked at are roughly between 90 and 100 pounds.

    Maybe you’re building a moonshine still on the side of a mountain or something. We’re not here to judge, just to offer insights. But in that case, weight is likely to be important.

    For the rest of your jobs, that’s why God invented the wheel. If you drive to a jobsite with stable floors, the saw’s weight can be mitigated by a functioning pair of wheels to handle the weight. In that case, look at jobsite saws that feature a stand designed to move around. A design that is intuitive to collapse and move around is superior to one that is clumsy. One of the reasons that the DeWalt DWE7491RS got our top pick was that it’s really very portable.

    Power

    Your choice here is pretty straightforward. If you bought a stationary contractor table saw, one that you set up and leave in your workshop, your intention is to take the work back there. But you’re looking for portability, which means you need to maximize the amount of power you take with you into the field.

    In truth, you could barely fit a butter knife in the space between these saws when it comes to power. All of them have 15 amp motors, and while we could dive right into the weeds about relative RPM, in practice that doesn’t mean a whole lot in terms of raw cutting power.

    Power vs Portability

    You’re looking beyond the models we reviewed, so you will want to consider the amount of power a saw can deliver in the field compared to others of comparable portability. You can find highly portable saws with smaller motors. Your choice comes down not to raw numbers one way or the other, but serious consideration of what kind of power you need versus how portable you need your saw to be. It’s a little more complicated than looking at numbers on paper.

    Rugged construction

    Close-up picture of a table sawThere are a couple of big differences between doing the work at the jobsite versus taking the work back to your workshop. Taking the work back home means having a wider array of specialized tools on hand to take on multiple tasks with the same workpieces. If you need to round corners in a piece of wood after cutting it down, that’s easier done in the workshop than taking a portable table saw, a jigsaw, and a sander to the job site.

    Durability

    That also means having more control in managing unanticipated hiccups. Jobsites are inherently harder on tools, so when you’re choosing a portable table saw it means taking a good, hard look at which ones are more likely to take a beating and keep working. You’ll also want to look at saws with long operational lives. You can get a saw that’s super simple to move around and delivers great cutting power, but if it won’t work under difficult conditions or is just flat-out poorly designed, you might as well be lugging around a suitcase full of rocks.

    Safety first

    We mentioned that working mobile means having less control over working conditions than in your workshop. You might work around other people, some of whom might have, er, lax safety standards. You might work outside, where weather can change abruptly. You might have reliability issues with your power source. You are also limited in alternative tools, so you might feel inclined to stretch your portable table saw’s operational range, whereas if you were back in the workshop you’d use something else. The point is, the variables are greater, but you can still exercise a little control by having as many excellent safety features built into your saw as possible.

    There are two questions you should ask before powering up a job site table saw:
    • Is the on/off switch easy to locate and hit at a second’s notice? Cutting the juice to your saw is the first step towards managing its safe operation.
    • How’s the kickback control? A saw that jerks back after hitting a knot is really dangerous.

    Accuracy in cuts

    A beautiful table saw fenceIt’s a hard reality that if you use a portable table saw, you’re going to sacrifice some accuracy for portability. If you need laser-accurate cutting, look at a stationary saw. But if you need to take your saw to job sites, it’s not something to overlook. If your saw doesn’t cut very accurate bevels in the field, those frames you’re constructing aren’t going to fit. Beyond the saw design itself, look for models with excellent fences to help guide your cuts. Between basic design and its superior fencing, the Bosch 4100 cuts bevels to within one-eighth-inch accuracy. That by itself was enough to warrant ranking it runner-up. If it’d been as portable as the DeWalt, it would have been our top pick.

    Price

    The Skil 3410 was our best for the money choice. It was also the least expensive model that we reviewed. It delivered the best for-dollar value. It didn’t deliver the best overall performance, however. The question of price isn’t just a matter of comparing prices and going with the one that will hit your wallet the lightest. It’s a matter of weighing different performance factors and sorting out which ones you need to pay for and which ones are luxuries. The primary reason the Jet JBTS-10MJS got dropped to the bottom of the pile was that it is the most expensive model we reviewed and it didn’t show a relative increase in performance quality.

    Conclusion:

    DeWalt’s DWE7491RS did it all for us. It delivered cutting power, accuracy, and ruggedness. It was also the easiest to move around, and at the price delivered a fairly reasonable value. The Skil 3410 was the lowest-priced and delivered the best for-dollar value. The Hitachi C10RJ was a capable saw but awkward to move around and use, but it was at least more affordable than the JET JBTS-10MJS, which for the price was horribly unstable.

    We hope you found our reviews valuable in finding the best portable jobsite table saw for your needs. Good luck in your search!

    Related posts

    Other categories

    Project ideas

    Hand & power tools

    woodworking

    Garden

    Automotive