HealthyHandyman is reader-supported. When you buy via links on our site, we may earn an affiliate commission at no cost to you.

7 Free DIY Bow Rack Plans You Can Make Today

Last Updated on August 19, 2020

Bow and arrows

Whether you’re an avid bowhunter, a precise target shooter, or a Renaissance Faire hero, there’s nothing more convenient than a rack where you can hang your bows.

It’s never fun to have to hide your favorite gear away in a closet or under your bed. Not only are bow racks a great way to proudly display your bows and arrows, they’re also easy and cheap to make at home with basic woodworking tools. Even if you’re not a woodworker, this list has something for you — PVC is a popular material for archers.

Bow racks aren’t as common in DIY circles as other furniture, so good plans can be tough to find. Luckily for you, we’ve gathered seven of the best from across the internet. Spend today building a bow rack you’ll be proud of, then tomorrow out on the range or in the backcountry.

1. Homemade Bow Rack by The Sticks Outfitter

The Sticks Outfitter posted this fun and easy bow storage hack on Instructables. The heart of this design is a spare wooden pallet, so if you’ve got one of those lying around, the rest is easy. The instructions are in video form, and it definitely helps to have a six-pack handy to complete the aesthetic.

Tools Needed:Screwdriver, Hammer

Supplies Needed:Pallet 2×4 Screws Hooks


2. Simple Bow Rack by One Project Closer

Simple Bow Rack by One Project Closer

This One Project Closer design for a beginner bow rack, devised by a dedicated bow hunter and woodworker, can be built for only $20 worth of supplies. Once you’ve built it, bolt it onto a bare wall, and use the pegs to store up to four bows of any kind — and if you stain it, it even looks greater.

Tools Needed: Pencil, Tape measure, Speed square, Hammer, Saw, Drill driver and bits

Supplies Needed: Stain grade pine, Dowel oak, Drywall screws, Wall anchors


3. PVC Bow Rack by Hunt Addicts

PVC Bow Rack by Hunt Addicts

If you’re not a woodworker, then not to worry — Hunt Addicts has a DIY rack plan with PVC pipe, just for you. It’s great for quickly putting down your bow while you go retrieve your arrows from the target but works for long-term storage too.

This design can also be adjusted to fit the length of your bow. There are even built-in holders for more arrows.

Tools Needed: Hacksaw, Tape measure

Supplies Needed: PVC pipe, PVC Ts, PVC elbows, PVC end caps, PVC cement, Sandpaper, Foam insulation


4. Cheap and Easy Bow Rack by TradTalk

Arrows

Image credit: Arrows by TheDigitalWay, Pixabay

This design comes to us from Esquire, a user of the TradTalk forums. It’s a bit more freeform and challenging than some of the others, but very rewarding. All you’ll really need to do is drill holes in a board, fit the dowels in, and find a place to mount it.

The simplicity of this design makes it a great family project, while ensuring that you can easily make this rack as long or short as you need.

Tools Needed: Pencil, Ruler, Drill press, Chop saw

Supplies Needed: Oak board, Oak dowel, Drywall screws


5. Compound Bow Rack by Popo’s Woodworks

This video tutorial from the Popo’s Woodworks YouTube channel will help you build a rack that’s perfect for holding compound bows and hunting arrows. It’s one of the best-looking $20 builds we’ve ever seen, and you can get it done

Tools Needed: Table saw, Jigsaw, Pencil, Tape measure, Clamps, Sander, Drill, Pocket hole jig, Brush

Supplies Needed: Boards, Dowel rods, Wood glue, Pocket hole screws, Stain, Wall anchors


6. Bow Storage Box by National Archery in Schools Program (NASP)

Bow Storage Box by National Archery in Schools Program (NASP)

NASP, the National Archery in Schools Program, made their design for an archery storage box available on the New Jersey Fish and Wildlife website. This plan makes a large box for bows and a smaller box for arrows attached to the top — perfect for archery classes or other large groups.

This plan doesn’t give advice, so it’s best for woodworkers who already know what they’re doing.

Tools Needed: Drill, Hammer, Screwdriver

Supplies Needed: Plywood, Pull handles, Boards, Chest handles, Nuts and bolts, Castor wheel assemblies, Hinges, PVC pipe, PVC caps, Screws, Nails, Sinkers, Stain, Wood glue


7. Bow Stand by World Archery

Bow Stand by World Archery

World Archery, the international governing body of championship target shooting, released a manual with extensive instructions on how to make your own equipment. It can be tricky to find — the easiest way is to follow that link — but it’s more than worth the search.

This stand can hold up to 10 bows, so like the NASP design, it’s great for teaching camps or holding tournaments.

Tools Needed: Saw, Drill, Screwdriver, Wood planer

Supplies Needed:Bolts, nuts, and washers, Screws, Wood glue, Dowels, Wooden boards, Aluminum


Featured image credit: Bow and arrows by TheDigitalWay, Pixabay

About the Author Adam Harris

Hi there! My name is Adam and I write for HealthyHandyman. I have a great passion for writing about everything related to tools, home improvement, and DIY. In my spare time, I'm either fishing, playing the guitar, or spending quality time with my beloved wife. You'll also often find me in my workshop working on some new project!