Makita 5007MG vs 5007MGA: Which One’s Best?
|Best Choice||Makita 5007MGA||
|Best Price||Makita 5007MG||
If you’re looking for a good circular saw, then there’s no doubting the fact that Makita is an excellent company to turn to for your shopping needs.
But there is a problem. They have a lot of stuff out there, and it can be a challenge deciding which of their products is most ideal for your situation.
If you’ve narrowed your search down to the Makita 5007MG versus the Makita 5007MGA, then we can help make your decision a little bit easier for you.
We’re going to take a deep dive comparative look at these products in this article, but for now, there’s some basic information that we’d like to provide you with.
The biggest difference that we noticed between these tools is the presence of an electric brake in the MGA.
Because of the electric brake, the MGA is going to perform better on professional job sites in terms of productivity and safety.
For most users, this difference is not going to mean very much, but for some, it can certainly be an important feature to have handy.
Shoppers should note that if they do want to enjoy the benefit of the brake, it’s going to cost them a little extra.
But of course, it’s hard to compare two tools in only a few paragraphs. With that in mind, we’ll now dive into our comparison of the Makita 5007MG versus the 5007MGA!
What’s the difference between them?
Performance is ostensibly identical between these tools. Both come with the same 15 AMP motor that is capable of delivering 5,800 rotations per minute.
Since rotations per minute largely determine how clean your cuts will be, this is definitely a feature that you should be fond of.
If you want to make quick, high-quality cuts, you can count on having the ability to do that with both of these tools.
These tools also have the same bonus features, which is our way of referring to components of the tool that, while not explicitly necessary for it to function, certainly make using it a little bit easier and better.
With these tools, the bonus feature that you’re getting is LED lights mounted near the blades of the units.
The purpose of these lights is to highlight your cutting area so that you make the most accurate lines possible.
Though this is becoming a fairly common feature in higher tier saws, it’s certainly never a given that you’re going to see it pop up, which means it’s always nice to see.
How effective these lights actually are is fairly subjective. Some people love them, while others express indifference. As far as we’re concerned though, it’s better to have them and not need them than to need them and not have them.
Don’t be shocked, but durability is also the same. Both saws feature magnesium infusion which means that they’re made durable without becoming excessively heavy.
As a result, you get an almost-jobsite durable saw that winds up weighing only 10.6 pounds.
Pretty nice, right? With this high level of durability you won’t have to worry about damaging your new saw at work, and with its lightweight, you’ll be just a little bit less fatigued at the end of the day.
The Electric Brake
So, what it really comes down to is a difference of just two things. The main distinction between these products is the electric brake that’s featured only in the MGA.
For shoppers who don’t know, the electric brake is supposed to stop the blade from spinning the second it stops receiving power.
Without this feature, the blade continues to rotate until it slows to a stop. For most shoppers this really isn’t going to be a concern.
However, if you need to move your saw around a lot, the electric brake will save you time since you won’t have to wait for the blade to stop spinning before moving it.
This aside, there really isn’t much of a reason for most users to want this feature. But hey, if you like it, go for it, right?
The Only Other Difference
The only other difference between these products is price. Because the MGA has an extra feature attached, Makita is asking a little bit more for it. While we can’t say the exact difference in price—since cost is so often subject to change—it does seem safe to say that a lot of shoppers will consider it significant.
As they say though, time is money. So if you’re a professional who would benefit from the expediency of an electric brake, paying the extra dollars now may seem like a no-brainer for long-term returns.
Still, for most shoppers, this is probably going to be the difference that tilts the scales in favor of the 5007MG. After all, neither of these tools are cheap to begin with. If you can shave a few bucks off the sticker price, why not do it, right?
Quick Rundown of Makita 5007MG
- Magnesium components create a lightweight saw (10.6 pounds) that is well balanced and jobsite tough
- Powerful 15.0 AMP motor delivers 5,800 RPM for proven performance and jobsite durability
- Two built in L.E.D lights illuminate the line of cut for increased accuracy
Quick Rundown of Makita 5007MGA
- Electric brake for maximum productivity
- Magnesium components create a lightweight saw (10.6 lbs.) that's well-balanced and job site tough
- Powerful 15.0 amp motor delivers 5, 800 RPM for proven performance and job site durability
So, which to get? In the case of the Makita 5007MG versus the Makita 5007MGA, there isn’t exactly a clear winner.
As you’ve undoubtedly noticed, these tools are identical in virtually all of the ways that matter.
The only real difference is the presence of the electric brake in the MGA. And, as you’ve learned by now (if you didn’t already know), the electric break isn’t going to make all that much of a difference to the vast majority of shoppers.
If you’re on a jobsite and you don’t want to waste time waiting for your blade to slow down, it may make sense to pay a little bit more for the electric brake.
Otherwise, feel free to buy the tool that strikes your fancy. Now that you’ve read our guide, you can make your own informed buying decision.